Description - Hilti SF 22­A Operating Instructions Manual

1.2 Explanation of the pictograms and other information
Warning signs
en
General warning
Obligation signs
Wear eye
protection
Wear breathing
protection
Symbols
Read the
operating
instructions
before use
Revolutions per
minute
Location of identification data on the power tool
The type designation can be found on the type identification
plate at the base of the power tool and the serial number on the
side of the casing. Make a note of this data in your operating
instructions and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 01
Serial no.:

2 Description

2.1 Use of the product as directed
The SF 22-A is a hand-held, cordless drill/driver for driving and
removing screws and for drilling in steel, wood and plastic.
The SFH 22-A is a hand-held, cordless hammer drill/driver for
driving and removing screws, for drilling in steel, wood and plastic
and for hammer drilling in lightweight concrete and masonry.
Working on materials hazardous to the health (e.g. asbestos) is
not permissible.
Do not use the battery as a power source for other unspecified
appliances.
Modification of the power tool or tampering with its parts is not
permissible.
To avoid the risk of injury, use only genuine Hilti accessories and
insert tools.
Observe the information printed in the operating instructions
concerning operation, care and maintenance.
The power tool is designed for professional use and may be
operated, serviced and maintained only by trained, authorized
personnel.
hazards that may be encountered.
18
Printed: 30.09.2013 | Doc-Nr: PUB / 5071534 / 000 / 02
Warning:
electricity
Wear a hard hat
Volts
Hammer drilling
This personnel must be informed of any special
Warning: caustic
substances
Wear ear
protection
Direct current
Drilling without
hammering
The power tool and its
Wear protective
gloves
Rated speed
under no load
Return waste
material for
recycling.