Download Print this page

Using The Repertory Keys As ”Function Keys” - Siemens euroset User Manual

Hide thumbs

Advertisement

Table of Contents
19.04.2000
2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719
Using the repertory keys as "function keys"
Various services/functions on public telephone systems (which may re-
quire a special order/application) can be selected using defined key com-
binations that can be obtained from your operator. The necessary key com-
binations can be saved on repertory keys as normal call numbers and can
be "dialed" and deactivated in the usual way.
Note:
If you activate the symbol display and store functions on the 2 2 nd level of
the repertory keys, then you can use the "function keys" to link the acti-
vation and deactivation of various services with the appearance and dis-
appearance of certain symbols on the display.
You should therefore remember, when assigning the repertory keys on the
2nd level, that the a a ctivation and deactivation of the display symbols
,
,
and
is linked to very specific keys on the second level –
irrespective of what call numbers or functions are set there!
Activating/deactivating the symbol display
>
Symbol display can be activates or deactivated as required. The factory
"
setting is for activated display.


Lift the handset,
then start the function.
"<
0 = Deactivate symbol display
or
1 = Activate symbol display.
a
Press the set key, then replace the handset.
If you press
and then one of the following repertory keys when symbol
display is active, then the appropriate display symbol will be activated/de-
activated on the display:
Displaysymbol
off
off
off
off
Recommended use of symbols and assigned keys:
Call forwarding immediately
Call forwarding on no reply
Anonymous call
Displaysymbol
on
on
on
on
on
(for 1 call)
Call forwarding on busy
Call waiting
– 11 –
English
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Euroset 2015