Download Print this page

Security, Lock, Call Duration Display; Changing The Pin; Locking/Unlocking Repertory Numbers To Prevent Changes; Locking/Unlocking The Telephone - Siemens euroset User Manual

Hide thumbs

Advertisement

Table of Contents
19.04.2000
2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719

Security, lock, call duration display

The telephone can be locked to prevent unauthorized use. You must enter
a 4-digit P P ersonal I I dentification N N umber (PIN) for this function.
>"l

Changing the PIN

J
Lift the handset, then start the function.
J
Enter the new four-digit PIN.
"<
Repeat the new PIN.
Press the set key, then replace the handset.
If you forget your PIN you will have to contact your specialist deal-
er.
>"l

Locking/unlocking repertory numbers to prevent changes

Lift the handset, then start the function.
J
If necessary, press
repertory key.


Enter the PIN (factory setting: 0000).
"<
0 = Repertory keys not locked
or
1 = Repertory keys locked
Press the set key, then replace the handset.

Locking/unlocking the telephone

Only the hot key number can be dialed when the telephone is locked (see
>"l
„Dialing a hot key number" auf Seite 5).


Lift the handset, then start the function.
J
0 = unlock; 1 1 = lock
or
"<
Enter the PIN.
Press the set key, then replace the handset.
If the telephone is locked, the display shows
>lJ
Temporarily deactivating the telephone lock (for one call)
J
Lift the handset, press the lock key, enter the PIN.
Dial a call number.
The telephone lock is active again when the handset
is replaced .
a
to lock/ unlock a 2nd level
– 8 –
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Euroset 2015