Erasing Incoming Messages; Additional Tad Operations; Setting Maximum Time For Incoming Messages - Brother MFC-440CN User Manual

Erasing incoming messages

To erase voice messages individually
a
Press Play/Record.
The machine will sound a two second
beep and begins message playback.
Each message is preceded by one long
beep, and followed by two short beeps.
b
To erase a specific message, press
Erase/Mute immediately after the two
short beeps, or while the message is
playing.
c
Do one of the following:
Press 1 to erase the message.
Press 2 to cancel.
d
Press Stop/Exit.
To erase all of your messages
a
Press Erase/Mute.
b
Do one of the following:
Press 1 to erase all of your voice
messages.
Press 2 to cancel.
c
Press Stop/Exit.
Digital TAD (MFC-660CN only)
Additional TAD
9
operations
9
Setting maximum time for
incoming messages
Your machine's default setting will save
incoming messages up to 30 seconds long.
To change this setting follow the steps below:
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose Setup TAD.
Press OK.
d
Press a or b to choose ICM Max.
Time.
Press OK.
9
e
Press a or b to choose the maximum
time setting for incoming messages (30,
60, 120 or 180 seconds).
Press OK.
f
Press Stop/Exit.
9
9
9
65