Borderless Printing; Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings - Brother MFC-440CN User Manual

Hide thumbs Also See for MFC-440CN:
Table of Contents

Advertisement

Chapter 14

Borderless printing

This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press a or b to choose Borderless.
Press OK.
b
Press a or b to choose Off (or On).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Setting your changes as a
new default
You can save the print settings you use most
often by setting them as default. These
settings will stay until you change them again.
a
Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
100
Restoring all settings to the
14
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.
14
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-660cn

Table of Contents