Making Your Parental Control Settings - Arris Touchstone TG1652 User Manual

from the Show drop-down, then click the Airport tab. The "Airport ID" field shows
Airport
the MAC address.
Linux: open a shell window and type
interface is eth1 (unless there is no Ethernet adapter, in which case the interface is eth0).

Making Your Parental Control Settings

Follow these steps to set up your Parental Controls:
1. Access and log into the wireless configuration interface as explained in
Configuration Interface
2. Click the
Parental Controls screen.
3. Check the
4. Configure any or all of the following parental controls:
Trusted MAC Addresses:
Enter the MAC addresses of any "trusted" computers on the network and click the
button. You can add two trusted computers. Once added, these trusted computers will
not be affected by the parental control settings. For example, you may want the
computers of the father and mother to be trusted, while the childrens' computers have
parental controls in effect.
Note: Refer to the
determining the MAC address of your computer.
Keyword and Web Site Filtering:
Release 16 STANDARD 1.2 August 2015
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.
(page 26).
tab and then click
Firewall
Enable Parental Controls
Finding the MAC Address of a Computer
Chapter 4: Installing and Connecting your Telephony Gateway
/sbin/ifconfig
in the side menu to display the
Parental Controls
checkbox and click the
Touchstone TG1652 Telephony Gateway User Guide
(and press Enter). The wireless
Accessing the
button.
Apply
(page 26) for information on
Apply
27