Table of Contents
Advertisement
Available languages
Available languages
Fig. 2
PRE-ASSEMBLY
ACCESSORIES AND ATTACHMENTS
Use only the recommended accessories with this table saw.
Follow the instructions that are supplied with theseaccesso-
ries.
TOOLS REQUIRED FOR ASSEMBLY
NOT SUPPLIED
Adjustable Wrench
Slotted Screwdriver
Grounding Lug
Adapter
Phillips Screwdriver
CAUTION
This tool must be grounded while in use to
protect the operator from electric shock.
Make sure this is
connected to a
known ground.
Two-Pronged
Receptacle
MINIMUM GAUGE FOR EXTENSION CORDS (AWG)
(When using 120 volts only)
Ampere Rating
More Than Not More Than
0
6
6
10
10
12
12
16
CAUTION
To avoid the risk of personal injury:
• Do not use adjustable or wobble-type dado's.
Use stackable dado sets only. Maximum
dado width is 1/2 in.
• Do not use a dado with a diameter greater
than 6 in.
• Do not attempt to use a dado set without
the proper dado insert plate secured in place.
• Do not use a molding head set with this saw.
• Do not modify this saw or use accessories
not recommended by customer service.
Steel Ruler
4
Total length of Cord
25ft. 50ft.
100ft.
18
16
16
18
16
14
16
16
14
14
12
Not Recommended
Combination Square
150ft.
14
12
12
Advertisement
Table of Contents
