Insight And Cmap Chart Options - Simrad NSO-II Operator's Manual

Hide thumbs Also See for NSO-II:

Installation manual (46 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

Table of Contents

3D charts

There are two 3D view options available:

• Rotate - default view keeping the boat in center on the chart panel

• Pan - allows you to move the 3D chart view away from the vessel

You toggle between these two options by tapping the pan and rotate icons. Active option

is indicated with red icon.

You return to default

Rotate

Rotating 3D chart

In this view the camera position is fixed, and the camera can only be rotated and tilted.

Be default the vessel's position will be in center if

angle is as seen from your eye position, looking toward the vessel. The vessel's rotation on

the chart is defined by the chart orientation settings.

You can change the camera's tilt angle by dragging your finger on the screen with vertical

motions. You rotate the camera around it's own vertical axis by dragging your finger

horizontally on the screen.

¼ Note:

You can only rotate the camera if you have panned away from default vessel posi-

tion, that is when the

Panning

The

Pan

option allows you to view the entire 3D chart, regardless of vessel position.

You move the camera away from the vessel and around in the chart by dragging your

finger on the screen. When you remove your finger from the screen the view will remain in

the selected position.

The camera's tilt angle is as set in

Zooming

You zoom in and out on a 3D chart by using the IN/OUT keys or the rotary knob on OP40.