Table of Contents
Advertisement
72 |
Viewing information about all AIS targets
Chart pages
From the menu, you can view information about
all AIS targets within range of your vessel.
Radar pages
The data bar includes information on up to 3 AIS targets.
The targets are listed with the closest target on top, and are color
coded to indicate target status.
Vessel alarms
You can define several alarms to alert you if a
target shows up within predefined range limits,
or if a previously identified target is lost.
Alarm ID
Dangerous vessel
AIS vessel lost
Vessel message
Vessel settings panel
Your vessel's MMSI number
You need to have your own MMSI (Maritime Mobile Service Identity) number entered in
the NSO-II system to be able to receive addressed messages from AIS and DSC vessels.
It is also important to have the MMSI number entered to avoid seeing your own vessel as
an AIS target on the chart.
¼ Note:
The Vessel message option in the alarm settings must be toggled on if any MMSI
message shall be displayed.
AIS - Automatic Identification System |
Description
Controls whether an alarm shall be activated when a vessel
comes within the predefined CPA or TCPA. See "Defining
dangerous vessels" on page 73.
¼ Note:
The check box controls whether the alarm pop-up
box is displayed and if the siren will sound. The CPA and
TCPA defines when a vessel is dangerous regardless of the
enabled/disabled state.
Sets the range for lost vessels. If a vessel is lost within the set
range this will trigger an alarm
Controls whether an alarm shall be activated when a message is
received from an AIS target
NSO-II Operator Manual
Advertisement
Table of Contents
