Table of Contents
Advertisement
20 |
Synchronize 2D/3D chart
Links the position shown on one chart with the position shown on the other chart when a
2D and a 3D chart are shown side by side.
Pop-up information
Selects whether basic information for chart items shall be
displayed when you tap the item.
Grid lines
Turns on/off viewing of longitude and latitude grid lines on the
chart.
Waypoints, Routes, Tracks
Turns on/off displaying of these items on chart panels.
Chart overlay
Radar, Structure, AIS and weather information can be displayed as overlay on your chart
panel.
When radar or weather overlay is selected, the chart context menu will be expanded to
include basic function for the selected overlay.
Radar, weather and AIS functions are described in separate sections in this manual.
Selecting chart type
Chart type is selected from the chart options menu, and the selection is set individually
for each chart panel.
If you have Navionics charts available in the SD card slot, you can show Navionics and
Insight charts simultaneously in a split screen.
¼ Note:
To show C-Map charts, you need to select
If Insight chart is embedded and you have a C-MAP card in the slot or on the Ethernet
network, the system will automatically select the chart with most chart details for your
displayed region.
The same applies if you have two Navionics charts available.
Chart data
The NSO-II can use Navionics Platinum Plus and TurboView via SD Card Slot accessible
from the NSO Marine Processor box.
Charts are shared over the network, so only one chart card per boat is required.
¼ Note:
The system will not automatically switch to embedded cartography if the SD card
is removed. A low-resolution chart will be displayed until you re-insert the SD card or
manually switch back to embedded cartography.
Charts |
NSO-II Operator Manual
Insight
chart type in the menu.
Advertisement
Table of Contents
