Nso-Ii Screen Layout - Simrad NSO-II Operator's Manual

See "Customizing
your system" on page 100
for further information
1-panel page

NSO-II screen layout

1 2
4 5 6
1 Instrument bar
Navigation and sensor info can be viewed in a user configurable instrument bar at the
top of your screen. The button in the top left corner will call up the Pages overview panel
(Home).
2 Panel button
You can tap the text on this area to end an ongoing operation, e.g. to remove the cursor
from the screen, to end route editing and to stop measuring distance.
3 Dialogs
Dialogs are used for user input or for presenting information to the user.
A dialog may be presented in full-screen or as a popup dialog in the centre of the screen.
Depending on type of information or entry, different steps are applied to confirm, cancel
and close the dialog.
A dialog can always be closed by tapping the
4 Menus
Different menus are available to select options and to configure your system. A menu
is displayed by tapping the
touchscreen.
5 Application panels
Each application connected to the system is presented in panels, and you can have several
panels presented on the screen at the same time, all depending of what combination is
most suitable at the moment e.g.
2-panels page
Introduction | NSO-II Operator Manual
3
7
in the upper right corner.
MENU panel button, or by tapping and holding on the
3-panels page
Video
8
4-panels page
| 11