Table of Contents
Advertisement
16
88 |
BEP CZone
The NSO-II system integrate with BEP's CZone system used for controlling and monitoring
a distributed power system on your vessel.
A separate manual will be provided with your CZone system. Refer to this documentation
and to the NSO-II Installation manual for how to install and configure the CZone system.
BEP CZone panel
Quick access to CZone panel from Pages
When the CZone system is connected and configured, the CZone icon will be shown on
the Pages overview panel (Home). This icon gives access to CZone panel, providing icons
for CZone modes.
CZone modes
The CZone modes provide a one press functionality that allows multiple circuits to be
controlled efficiently. The modes are configured during installation of the system.
All available modes will be displayed on the CZone panel.
If there are more than 6 modes configured on screen the rest of the modes will move to
the More Modes option.
Intuitive CZone modes status icon
The CZone modes provide a one press functionality that allows multiple circuits to be
controlled efficiently. The modes are typically configured during installation.
Up to 6 commonly used modes can be displayed on the CZone panel. If more than 6
modes are configured, the rest are accessible under More Modes... option.
BEP CZone |
NSO-II Operator Manual
Mode is active
Mode is inactive
Advertisement
Table of Contents
