Table of Contents
Advertisement
11
70 |
Instrument panels
The instrument panels consists of multiple gauges - analog, digital and bar - that can be
customized to display selected data. The instrument panel displays data on dashboards,
and you can define up to ten dashboards within the instrument panel.
¼ Note!
To include fuel/engine information, engine and tank information has to
be setup from the Settings panel.
Dashboards
Three dashboard layouts are predefined to display gauges showing information about
vessel, navigation information and angler requirement.
You switch between a panel's dashboards by tapping the left and right side of the panel,
or by selecting the dashboard from the menu.
Vessel dashboard
¼ Note:
Additional dashboards can be activated. Refer to "Edit an Instrument dashboard"
below.
Customizing the Instrument panel
You can customize the Instrument panel by changing the data for each of the gauges in
the dashboard, by changing the dashboard layout, and by adding new dashboards. You
can also set limits of analog gauges.
All edit options are available from the Instrument panel menu.
Available editing options will depend on which data sources that are connected to your
system.
Edit an Instrument dashboard
Select the dashboard you want to edit, then;
1.
Activate the menu
2.
Select the edit option
3.
Tap and hold on the gauge you want to change. The selected gauge will have a red out-
line
4.
Select info to display
Save your changes by using the menu or by tapping the
Instrument panels |
NSO-II Operator Manual
Navigation dashboard
Finish editing
Angler dashboard
panel button.
Advertisement
Table of Contents
