Notification By Sms; Sms Mailboxes; Ans Machine - Siemens Gigaset S685 IP User Manual

Please note:
– The + symbol is not transferred for interna-
tional area codes.
¥
You should then enter '00' at the start of
the number.
– If an SMS contains several numbers, the
next number will be highlighted if you
scroll down until the first number disap-
pears from the display.
If you wish to use the number to send an
SMS:
¤
Save the number with the local area
code (dialling code) in the directory.

Notification by SMS

You can be notified via SMS about missed
calls and also about new answer machine
messages.
Precondition: For missed calls, the caller's
number (CLI) must have been transmit-
ted.
Notification is sent to your mobile phone
or another phone with SMS functionality.
You only need to save the phone number
to which notification should be sent (noti-
fication number) and set the notification
type.
Please note that your network provider will
usually charge for SMS notifications.
Saving the notification number
¢ ¢ ¢
v î
SMS
¢
Notify Number
~
Enter the number (including
area code) to which the SMS is
to be sent.
Press the display key.
§Save§
a
Press and hold (idle status).
Warning:
Do not enter your own fixed line number for
the notification of missed calls. This can lead to
chargeable endless looping.
Settings
Setting the notification type
¢ ¢ ¢
v î
SMS
¢
Notify Type
¤
Change multiple line input if necessary:
Missed Calls:
Select On if you require SMS notifica-
tion.

Ans Machine:

Select if you require SMS notifica-
On
tion.
¤
Save changes (page 147).

SMS mailboxes

The general mailbox is the default set-
ting. Anyone can access this mailbox and
it cannot be protected by a PIN. You can
additionally set up three personal mail-
boxes and protect these with a PIN. Each
mailbox is identified by a name and a
"mailbox ID" (a kind of extension number).
Please note:
u
If you operate a number of devices
(base stations) with SMS functionality
on a single phone line, then each SMS
mailbox ID may only occur once. In this
case you must also change the preset
ID of the general mailbox ("0").
u
You can only use personal mailboxes if
your service provider supports this
function. You can tell whether this is
the case by the addition of a star (*) to
the number of a (preset) SMS centre.
u
If you have forgotten your mailbox PIN,
you can reset it by restoring the base
station's default settings. This will
delete all SMS messages from all
mailboxes.
SMS (text messages)
Settings
57