Siemens Gigaset S685 IP User Manual page 114

Proceed as follows to load the data
onto your telephone:
¤
In the Auto Configuration
Provider. This will display
Select VoIP
information on the download proce-
dure.
Please note:
If you click the Select VoIP Provider
any changes that have been made to the
Web page will be saved and checked. Values
may need to be corrected before the
VoIP Provider operation is started.
The download procedure has several
steps:
¤
Click Next.
¤
From the list, select the country for
which the list of VoIP providers is to
be loaded.
¤
Click Next.
¤
Select your VoIP provider from the
list.
If your provider is not included in the
list, select Provider. In this case
Other
you will have to enter the general
provider data by hand (see "Area:
General Provider Data" and "Area:
Network" below).
¤
Click Finish.
The details of the selected provider are
loaded to your phone and saved under
General Provider Data
(page 114). You cannot make
Network
any further entries in these areas.
The Provider field shows the name of
the selected provider or
A link to the provider's homepage is dis-
played where available.
To complete configuration of your VoIP
connection enter your account data
under
Personal Provider
area, click
button,
Select
(page 114) and
Other Provider.
Data.
Web configurator –configuring phone via PC
Area: Personal Provider Data
Enter the configuration data that is neces-
sary for accessing your VoIP provider's SIP
service. You will receive this data from the
VoIP provider.
The field names (Authentication Name
listed in the following are standard names
and may change. If you have already
downloaded the provider's general details
("Select VoIP Provider" button, see above),
field entries will be replaced by provider-
specific names to facilitate orientation
(e.g. SIP-ID instead of
Authentication Name
Specify the registration or authentica-
tion ID agreed with your VoIP provider.
The registration ID serves as the access
ID that your phone must specify when
registering with the SIP proxy/registrar
server. The Authentication Name
mainly identical to the Username, i.e. to
your Internet phone number.
Authentication password
Enter the password that you have
agreed with your VoIP provider in the
Authentication password
needs the password when registering
with the SIP proxy/registrar server.
Username
Enter the user name (caller ID) for your
VoIP provider account. This ID is usually
identical to the first part of your SIP
address (URI, your Internet phone
number).
Example: If your SIP address is
"987654321@provider.com", enter
"987654321" in Username.
Display name (optional)
Enter any name that should be shown
in the other caller's display when you
call them via the Internet (example:
Anna Sand). All characters in the UTF8
character set (Unicode) are permitted.
The name must not exceed 32 charac-
ters.
etc.)
Authentication Name).
is
field. The phone
113