Siemens Gigaset S685 IP User Manual page 141

Appendix
VoIP status codes
If you have problems with your VoIP con-
nections, activate the
function (page 100, page 132). You will
then receive a VoIP status code that will
support you in problem analysis. Also
enter the code during problem analysis by
the Service department.
In the following tables you will find the
meanings of the most important status
codes and messages.
Status Meaning
code
0x31 IP configuration error:
IP domain not entered.
0x33 IP configuration error:
SIP user name
not entered.
This is shown, for example, when
dialling with a line suffix, if no con-
nection is configured for the suffix on
the base station.
0x34 IP configuration error:
SIP password
word) not entered.
0x300 The called party can be reached
under several phone numbers. If the
VoIP provider supports this, a list of
the phone numbers is transmitted as
well as the status code. The caller can
select to which number he wants to
make the connection.
0x301 Permanently redirected.
The called party can no longer be
reached under this number. The new
number is transmitted to the phone
together with the status code, and
the phone then no longer accesses
the old number but dials the new
address immediately.
0x302 Temporarily redirected.
The phone is informed that the called
party cannot be reached under the
number dialled. The duration of redi-
recting is time-limited. The phone is
also notified of the duration of redi-
recting.
140
Show Stat. on HS
(Authentication
Name)
(Authentication pass-
Status Meaning
code
0x305 The query is sent to a different "proxy
server", e.g. to balance out incoming
queries. The phone will make the
same query once again to another
proxy server. This is not a redirection
of the address per se.
0x380 Other service:
The query or the call could not be
made. But the phone is notified what
other options there are to be able to
connect the call.
0x400 Wrong call
0x401 Not authorised
0x403 The requested service is not sup-
ported by the VoIP provider.
0x404 Wrong phone number.
No caller on this number.
Example: In a local call you have not
dialled the area code although your
VoIP provider does not support local
calls.
0x405 Method not permitted.
0x406 Not acceptable.
The requested service cannot be pro-
vided.
0x407 Proxy authentication required.
0x408 The party cannot be reached (e.g.
account has been deleted).
0x410 The requested service is not available
from the VoIP provider.
0x413 Message is too long.
0x414 URI is too long.
0x415 Query format is not supported.
0x416 URI is faulty.
0x420 Incorrect ending
0x421 Incorrect ending
0x423 The requested service is not sup-
ported by the VoIP provider.
0x480 The dialled number is temporarily
unavailable.
0x481 The recipient is not available.
0x482 Double service query