Handset settings
Please note:
– You can only operate headsets on your
handset that have the headset profile.
– It can take up to 5 seconds to create a con-
nection between your handset and a Blue-
tooth headset. This applies both when a call
is accepted using the headset or transferred
to the headset, and when a number is
dialled from the headset.
Activating/deactivating Bluetooth
mode
¢
¢
¢
v
í
Data Transfer
Bluetooth
¢
Activation
Press
to activate or deactivate Blue-
§OK§
‰
tooth mode (
= activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated:
Ð
ò
V
INT 1
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note:
– If you register a headset, any headset that is
already registered will be overwritten.
– If you register a headset to your handset
that is already registered to another device
(e.g. to a mobile phone), the existing regis-
tration data may be overwritten by the new
registration.
If you would like to operate a headset on
both the mobile phone and on your hand-
set, you should use a headset that supports
several terminals.
¢
¢
¢
v
í
Data Transfer
Bluetooth
¢
/
Search Headset
Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
Press the display key.
§Options§