Belt Clip And Headset - Siemens Gigaset S685 IP User Manual

Provider registration failed!
u
Your personal data for registering with
the VoIP provider may have been
entered incompletely or incorrectly.
¤
Check your entries for Username,
and
Authent. Name
In particular, check your use of
upper and lower case.
To do this, open the following menu
on your handset:
¢ ¢
v Ð
Telephony
(enter system PIN)
istr. (see page 100)
u
The server address for the VoIP server
has not yet been entered, or has been
entered incorrectly.
¤
Start the Web configurator.
¤
Open the following Web page:
¢
Settings Telephony
¢
Connections.
¤
Click the button next to the first
Edit
VoIP connection.
¤
Edit the server address where neces-
sary.
Please note:
If port forwarding is activated on your router
for the ports that have been registered as the
SIP port (Standard 5060) and the RTP port
(Standard 5004), it is advisable to deactivate
DHCP and assign the phone a static IP address
(otherwise you may not be able to hear the
other party during VoIP calls):
– Assign IP address via the handset menu:
£ £ £
v Ð
Base
Or
– Assign IP address via the Web configurator:
¥
Open the following Web page:
£
Settings IP Configuration.
¥
Select
IP address
Please note that the IP address and subnet
mask depend on the router's address block.
You must also enter the standard gateway and
DNS server. The IP address for the router is
generally entered here.
Authent. Password.
¢
VoIP
¢
Provider Reg-
Local Network
type.

Belt clip and headset

By using a belt clip and headset (optional)
you can easily make your handset a con-
stant companion both inside the building
and in its immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt
clip on both sides of the handset at the top
and at the same height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
Connection socket for headset
You can connect various headset types
(with 2.5 mm jack connector), including
HAMA Plantronics M40, MX100 and
MX150.
A compatibility list of tested headsets is
available on the Internet at:
www.plantronics.com/productfinder
First steps
19