Siemens Gigaset S685 IP User Manual page 113

Web configurator –configuring phone via PC
You must enter the VoIP provider's general
access data in these areas. You can down-
load this data for many VoIP providers
from the Internet (see "Area: Auto Config-
uration").
¤
Make the settings on the Web page.
¤
Save them in the phone, see page 116.
¤
Activate the connection if necessary,
see page 116.
Area: IP Connection
Connection Name or Number
Enter a name for the VoIP connection or
the VoIP phone number (max. 16 char-
acters). This name is used to display the
connection on the handset and the
Web configurator interface, e.g. during
allocation of send and receive numbers
(page 120), for the call display
(page 29).
Area: Auto Configuration
The entire configuration process or a large
part of the configuration for a VoIP con-
nection is automated for many VoIP pro-
viders. You can download the necessary
VoIP access data to your telephone from
the Internet.
You have the following options:
u
Fully automated configuration
Preconditions:
– You have received an auto configu-
ration code from your VoIP pro-
vider.
– The general access data for your
VoIP provider is available for down-
loading.
You can download all the data required
for VoIP access from the Internet:
¤
Enter the auto configuration code
you received from your VoIP pro-
vider in the
Auto Configuration
the
Auto Configuration Code
¤
Click Start Auto
112
area in
field.
Configuration.
The telephone establishes a connec-
tion to the Internet and downloads all
data required for the VoIP connection,
i.e. the general provider information
and your personal provider data
(account data) are saved to your base
station.
If further information is used on the
Web page, this is deleted as soon as
Start Auto Configuration
fields in the Personal Provider Data
General Provider Data
server addresses in the
overwritten by the downloaded data.
Generally, you should not have to enter
any additional data on this Web page.
Please note:
If the message
Download of settings not possi-
appears, no data will be
ble! File is corrupt!
loaded onto the phone. Possible causes of
this are:
– The incorrect code has been entered
(e.g. upper/lower case rules have not
been followed). If necessary, enter the
code again.
– The file that has been downloaded is
invalid. Please consult your VoIP pro-
vider.
When the download is complete, the
Connections list will be displayed.
¤
Activate the connection as described
on page 116.
You can now be reached on the corre-
sponding VoIP phone number.
u
Automatic configuration of general
VoIP provider data
Precondition: You have received your
account details from your VoIP provider
(e.g. Authentication
password).
Profile files of the most important VoIP
providers are available for download on
the Siemens Internet server. The
address for the server is stored in your
phone (page 132).
is clicked. The
and
areas and the
area are
Network
Name, Authentication