Siemens Gigaset S685 IP User Manual page 19

First steps
Completing the VoIP settings
After the entries have been completed,
the handset reverts to idle status.
If all the settings are correct and if the
phone can establish a connection to the
VoIP server, then the internal name of the
handset will be displayed (example):
Ð Ã V
INT 1
15.01.08 09:45
? SMS
You can now use your phone to make calls
via the fixed line network and the Internet.
Callers can reach you on your fixed line
number and your VoIP number.
Please note:
– To ensure that you can always be reached
via the Internet, the router must be perma-
nently connected to the Internet.
– If you try to make a call via a VoIP connec-
tion that is not configured correctly, the fol-
lowing VoIP status message will appear on
the display: IP configuration error: xxx
(xxx = VoIP status code).
config. error: xxx
The various status codes and their respec-
tive meanings can be found in the appen-
dix on page 140.
18
No connection to the Internet/VoIP server
If one of the following messages is dis-
played instead of the internal name after
the connection assistant is closed, errors
have occurred:
u
Server not accessible!
u
Provider registration failed!
Below you will find possible causes and
measures you can take.
Server not accessible!
The phone has no connection to the Inter-
net.
¤
Check the cable connection between
the base station and the router (the
LED on the base station must light up)
and the connection between the router
and the Internet connection.
¤
Check whether the phone is connected
to the LAN.
– It may not have been possible to
dynamically assign an IP address to
the phone
or
– You have assigned a static IP address
to the phone that has either already
been assigned to another LAN sub-
scriber or does not belong to the
router's address block.
¤
or VoIP
Press the paging key on the base sta-
tion. The IP address appears on the
handset display.
¤
Press the talk key on the handset to
end paging call.
¤
Start the Web configurator with the
IP address.
¤
If no connection can be established,
change the settings on the router
(activate DHCP server) or the
phone's IP address.