Automatically Pausing Recording (Pause); Start New Files Automatically During Recording (Trk Inc); Mark Function; Adding Marks Manually To A Recording - Tascam DR-100 Owner's Manual

6–Recording

Automatically pausing recording (PAUSE)

You can set the unit to automatically pause after
the input level of the recording becomes less
than the setting and the
END LEVEL
passes.
1 Press the key to open the
AUTO
2 Set the item to
MODE
3 Set the value of the
END LEVEL
4 Set the value of the
END DELAY
5 Press the key to return to the Home
HOME
Screen.
6 Press the ( ) key while holding down
º
RECORD
the key to put the unit into recording
AUTO
standby.
Recording starts automatically when the input
signal exceeds the
START LEVEL
NOTE
Press the STOP ( ) key to stop automatic recording.
ª
Start new files automatically during
recording (TRK INC)
A new file can be created automatically during
recording when, after once becoming less than the
end level, the input signal exceeds the start level
again.
1 Press the key to open the
AUTO
2 Set the item to
MODE
3 Set the value of the
END LEVEL
4 Set the value of the
START LEVEL
5 Press the key to return to the Home
HOME
Screen.
6 Press the ( ) key while holding down
º
RECORD
the key to put the unit into recording
AUTO
standby.
Recording starts automatically when the input
signal exceeds the
START LEVEL
30
TASCAM DR-100
time
END DELAY
screen.
AUTO REC
.
PAUSE
item.
item.
value.
screen.
AUTO REC
.
TRK INC
item.
item.
value.
NOTE
• Press the STOP ( ) key to stop automatic recording.
ª
• You can also create new files manually.
"Dividing a recorded file manually (DIVIDE)" on
page 28.)
• When new files are created, incremental numbers
are added to the end of each file name.
CAUTION
• A new file cannot be created if the total number of
files and folders would exceed 999.
• Files shorter than two seconds cannot be created.
• If the name of a new created file would be the
same as that of an existing file, the number will be
incremented until the new file has a unique name.

Mark function

Adding marks manually to a recording

You can manually add marks to a recording where
you want them.
Press the
ENTER/MARK
add a mark.
NOTE
• A mark is automatically added when you restart
recording after temporarily pausing.
• Mark information is stored in the file with
numbers between 01–99. The maximum number
of marks in a file is 99.

Moving to a mark position

You can move to marks in the currently selected
file when paused and during playback.
You can use this function to identify points to
create shortcuts to the beginning of songs, for
example.
Press the keys while pressing and
Â/¯
holding the
ENTER/MARK
when stopped.
NOTE
You cannot move to a mark in a different file.
(See
key while recording to
key during playback or