Table of Contents
Advertisement
INSTALLATION MANUAL
Typical Installations
Will Utilize the
Modem Port or
the Ethernet Port-
Not Both.
!
If using an ELAN
Z•600 Communications
Controller,HDC2050
HD Series Telephone
Interface Card, or
SW MAC24,
the VIA!dj and all other
peripheral devices that
connect to the phone
line should be
connected in front of
(before) the ELAN system.
Page 26
Connections (cont'd)
Ethernet/Modem Connections
The VIA!dvdj must access the Internet in order to obtain Title information, Cover
Art, etc. Both a Dial-Up Modem port and an Ethernet port are provided for this pur-
pose. Whenever possible, ELAN recommends connecting to a high-speed Internet
connection through the Ethernet port.
Ethernet Connections
Connect an Ethernet cable to the Ethernet jack on the rear of the VIA!dvdj. Connect
the other end to an Ethernet port that is connected to a home network. This con-
nection provides the fastest access to the Internet.
Note: A DHCP server must be present on the home network in order for the
VIA!dvdj to automatically configure settings to access the Internet.
Dial-Up Modem Connections
If unable to access the Internet through the Ethernet, connect a standard analog
telephone line between the RJ11 connector on the VIA!dvdj and a telephone wall
jack to access the Internet with the VIA!dvdj's built-in Modem.
VIA!dvdj Rear
Or
ETHERNET
Ethernet
Cable
Ethernet
Wall Jack
E L A N
MODEM
Telephone
Cable
VGA
©2005 ELAN Home Systems All rights reserved.
H O M E
S Y S T E M S
Telephone
Wall Jack
Advertisement
Table of Contents
