Cabinet Saw Specifications - SawStop CB31230 Owner's Manual

Cabinet Saw Specifications

Overall saw dimensions:
Cabinet footprint:
Cast iron table:
Extension wing:
Extension table (optional):
Weights (may vary with motor):
Shipping weight (approx.):
Blade:
Blade diameter:
Blade tilt:
Blade kerf:
Blade plate thickness:
Max. depth of cut, blade at 0º:
Max. depth of cut, blade at 45º:
Max. rip, right of blade:
Max. rip, left of blade:
Dado diameter:
Dado max. width:
Arbor diameter at blade:
Main bearing size:
Second bearing size:
Table in front of blade (max. elevation):
Table behind blade (max. elevation):
Arbor Runout:
Blade Lateral Movement Over Full Elevation Range:
Table Flatness Measured Diagonally:
Overall Table and Extension Wing Flatness:
Blade Alignment with Miter Slot:
Deviation of Miter Gauge Indexing Stops
from actual angle:
Alignment between Spreader and Blade:
Miter slots:
Dust collection port diameter:
Riving knife / spreader thickness:
Blade guard:
Standard Insert:
Dado Insert:
Belts:
Hand Wheels:
Motor Options:
3 hp, 1 phase, 230V, 13A, 60 Hz, TEFC
5 hp, 1 phase, 230V, 20.5A, 60 Hz, TEFC
5 hp, 3 phase, 230V, 13A, 60 Hz, TEFC
5 hp, 3 phase, 480V, 7A, 60 Hz, TEFC
7.5 hp, 3 phase, 230V, 19A, 60 Hz, TEFC
7.5 hp, 3 phase, 480V, 9A, 60 Hz, TEFC
Cabinet Saw Manual 1st Reprint.i67 67
44" w x 34" d x 34" h
69 1/4"w x 36 1/2" d x 34" h (w/ optional fence & 36" rails)
85 1/4" w x 36 1/2" d x 34" h (w/ optional fence & 52" rails)
20" w x 25" d
24" w x 30" d, 44" w x 30" d (w/ extension wings)
10" w x 30" d
24" w x 30" d (36" rails), 40" w x 30" d (52" rails)
530 lbs (table saw only)
635 lbs (w/ optional fence, 36" rails & table)
685 lbs (w/ optional fence, 52" rails & table)
675 lbs (table saw only)
60-tooth, professional grade, 5/8" arbor
10"
Left
3 mm
2 mm
3 1/8"
2 1/4"
52 1/2" (w/ optional 52" rails)
36 1/2" (w/ optional 36" rails)
12 1/2"
8" (requires a separate brake cartridge)
13/16"
5/8"
62 mm OD x 30 mm ID
52 mm OD x 25 mm ID
11"
9 3/4"
0.001" Maximum Allowable Runout
0.006" Maximum
0.010" Maximum Gap
0.025" Maximum Gap
0.010" Maximum displacement
±0.25º
0.010" Maximum difference
T-shaped, 3/4" at top, 1" at bottom, 3/8" deep
4"
2 mm
polycarbonate, extends only 5/8" to right of blade
zero clearance, phenolic core, melamine surfaces
zero-clearance, phenolic core, melamine surfaces
2 V-ribbed belts— arbor belt is static dissipative
8" diameter, cast iron with chrome handle
5 hp, 3 phase, 600V, (Canada)
7.5 hp, 3 phase, 600V (Canada)
3 hp, 1 phase, 240V, 50 Hz (Australia)
5 hp, 3 phase, 415V, 50 Hz (Australia)
3 hp, 3 phase, 230V, 8A, 60 Hz, TEFC (discontinued)
SawStop 10" Industrial Cabinet Saw 67
3/9/2010 8:33:10 AM