SawStop CB31230 Owner's Manual page 11

(On saws with 230V, single phase motors.)
WARNING
!
Connect Only 208-240 Volts,
Single Phase Power.
This machine must be connected to an
electrical ground in accordance with the
National Electrical Code. Failure to connect
to an adequate ground may cause the
safety system to malfunction and
could result in a serious injury.
(On saws with 230V, three phase motors.)
WARNING
!
Connect Only 208-240 Volts,
Three Phase Power.
This machine must be connected to an
electrical ground in accordance with the
National Electrical Code. Failure to connect
to an adequate ground may cause the
safety system to malfunction and
could result in a serious injury.
Cabinet Saw Manual 1st Reprint.i9 9
WARNING
!
1. Use the blade guard and spreader for every
2. Use the riving knife for non-through sawing.
3. Keep hands away from the saw blade. Use a
(On saws with 480V, three phase motors.)
Connect Only 460-480 Volts,
This machine must be connected to an
electrical ground in accordance with the
National Electrical Code. Failure to connect
to an adequate ground may cause the
WARNING
!
To avoid loss of SawStop
protection during coast down,
do not turn off Main Power until
blade has stopped spinning.
WARNING
!
operation for which it can be used.
push-stick when required.
WARNING
!
Three Phase Power.
safety system to malfunction and
could result in a serious injury.
SawStop 10" Industrial Cabinet Saw 9
3/9/2010 8:32:40 AM