Regency E18-NG Owners & Installation Manual page 40

INSTALLATION
15. Install supplied support section with 8 screws to reinforce
Firesong fi rebox. (See Diagram 1.13).
Diagram 1.13
16. Repeat Steps 14 & 15 on left side.
17. Remove existing Firesong rating plate from cut out fi rebox.
This rating plate must be retained and affi xed to the unit. (See
Diagram 1.14 and 1.15).
Diagram 1.14
40
18. Final modifi ed fi rebox should look like Diagram 1.15
NOTE: Shown with fl ue collar and 6" fl ex installed.
Firesong decal affi xed
IMPORTANT NOTE:
Separate inner and outer fi rebox on E18 (see instructions in this
manual) Before installing outer fi rebox - lay on a fl at surface and
trim off 1-1/4" of each fi rebox fastening fl ange as shown below.
Diagram 1.15
Regency ® E18 Gas Fireplace Insert