Regency E18-NG Owners & Installation Manual page 15

19. ZC box and surround installed into framed opening.
20. Separate E18 inner and outer fi reboxes - see E18 installation manual
for details.
21. Set E18 outside fi rebox legs as shown below.
Right side shown
Outside fi rebox shown in position - refer to
measurements (Step 22) before securing to surround.
Regency ® E18 Gas Fireplace Insert
22. Follow instructions in the manual for installation into a EP28-2 for exact
Set to this
hole
23. The top panel of the ZC surround may be removed to ease the in-
24. Follow instructions in the E18 installation manual to complete the
measurements for installation of the outside fi rebox to the surround.
(3 )LUHER[
 
PP
stallation of the venting - reinstall top panel after venting is installed.
* Extra venting may be required to get inside the ZC box. A 4" fl ex can
be used if required (not provided), if inside ZC shell.
install of inner fi rebox.
Follow Step 25 before installing faceplate.
INSTALLATION
 
PP
 
PP
$
/HJ
15