Regency E18-NG Owners & Installation Manual page 24

INSTALLATION
13. Cut to remove left and right cross piece at front of fi rebox.
10. Remove Serial No. Decal attached to valve assembly and affi x to wall of
28C fi rebox.
Montigo Serial Decal
Cut out front cross piece to remove
11. Flatten left and right louver brackets. 14 Cut out back cross bar to complete modifi cation. Fold back any excess
metal after removing the cross piece.
Flatten louver brackets
12. Flatten fl ange (left ,right and rear) in locations shown below.
Cut out back cross bar
Flatten fl ange
24
Regency ® E18 Gas Fireplace Insert