Toro Multi Pro 5700-D Service Manual page 21

DANGER
Because diesel fuel is highly flammable, use
caution when storing or handling it. Do not
smoke while filling the fuel tank. Do not fill fuel
tank while engine is running, hot or when ma-
chine is in an enclosed area. Always fill fuel tank
outside and wipe up any spilled fuel before start-
ing the engine. Store fuel in a clean, safety–ap-
proved container and keep cap in place. Use die-
sel fuel for the engine only; not for any other
purpose.
Check Fuel Lines and Connections
Check fuel lines and connections periodically as recom-
mended in the Operator's Manual. Check lines for dete-
rioration, damage, leaks or loose connections. Replace
hoses, clamps and connections as necessary.
Drain and Clean Fuel Tank
Drain and clean the fuel tank if the fuel system becomes
contaminated or if the machine is to be stored for an ex-
tended period.
To clean fuel tank, flush tank out with clean solvent.
Make sure tank is free of contaminates and debris.
Fuel Tank Removal
1. Park machine on a level surface, stop engine, en-
gage parking brake and remove key from the ignition
switch.
2. Clamp fuel supply hose close to the fuel tank outlet.
3. Remove fuel supply hose from fuel filter (Fig. 2). Pull
fuel hose through R–clamps on frame and position hose
end into a suitable container to drain fuel tank.
4. Unclamp fuel hose and empty fuel tank.
5. Remove fuel tank from machine using Figure 1 as a
guide.
Fuel Tank Installation
1. Install fuel tank to machine using Figure 1 as a guide.
2. Route fuel hose through R–clamps on frame. Con-
nect fuel hose to the fuel filter and secure with clamp.
3. Fill fuel tank (see Operator's Manual).
4. Start engine and check fuel line connections for any
leakage.
Multi Pro 5700–D
2
1
1. Fuel filter
3
2
1. Fuel supply hose
2. Fuel filter
Page 3 – 5
Figure 2
2. Fuel hose (from tank)
1
3
Figure 3
3. R–clamp
Kubota Diesel Engine