Service And Repairs; Service And Repairs; Suction Dampener - Toro Multi Pro 5700-D Service Manual

Service and Repairs

Suction Dampener

The suction dampener is mounted to the suction line at
the spray pump (Fig. 2) and is used to dampen suction
pulses to smooth suction flow. During normal pump op-
eration, the suction dampener diaphragm will move.
IMPORTANT: Make sure to neutralize and remove
chemicals from pump and hoses before loosening
and removing spray system components.
A damaged suction dampener diaphragm will allow a
suction leak and will cause improper pump operation. If
the diaphragm is damaged, remove diaphragm from
dampener housing and replace it (Fig. 3).
Spray System
3
2
1. Spray pump
2. Suction dampener
4
1. Spray pump
2. O–ring
Page 6 – 8
1
Figure 2
3. Suction hose
2
3
Figure 3
3. Dampener housing
4. Diaphragm
Multi Pro 5700–D
1