Toro Multi Pro 5700-D Service Manual page 143

IMPORTANT: Make sure to remove and neutralize
chemicals from tank and other components before
1
disassembly. Wear protective clothing, chemical re-
sistant gloves, and eye protection during repair.
Disassembly (Fig. 14)
1. Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
2. Drain spray tank (see Operator's Manual).
2
3. Label disconnected hoses for proper installation af-
ter repairs are completed.
4. Remove agitation nozzles as required using Figure
Figure 15
14 as a guide. Discard all removed o–rings and gaskets.
1. Agitation valve motor 2. Agitation supply hose
Assembly (Fig. 14)
NOTE: Coat all o–rings with vegetable oil before instal-
lation to reduce the chance of damage during assembly.
1. Install agitation nozzles using Figure 14 as a guide.
Replace all removed o–rings and gaskets.
2. Check spray system for leaks.
Multi Pro 5700–D Spray System
Page 6 – 17