Unlocking The Tool Menu; The Tool Menu - Functions - Truma Boiler Manual

AL D E HEATI N G OP ERATIN G I N ST R U CT IONS
2. The settings are ready and the boiler is
working at set temperature.
3. In order to switch off gas operation,
press Off.

8. Unlocking the tool menu

It is possible to go from the setting menu to
the tool menu. Under the tool menu you can
access the other functions of the control panel,
described in section 9.
1. The control panel in setting menu.
Press the unlock symbol.
+22°C
2 kW
Off
2. The control panel in unlocking menu. Press
on open padlock, then OK or MENU to
unlock the tools menu. When activated the
symbol changes colour to green.
3. The control panel in setting menu with
unlocked tool menu. In order to get to the
tool menu, press the symbol.
120
ON
On
OK
+22°C
2 kW
ON
Off On

9. The tool menu - functions

When you are in the tool menu (see section 8),
you can use the tools described below. Step
between the various tool fields by pressing the
up or down arrow symbols. You can always
leave the tool menu with the MENU button.
Note: Functions marked with * indicate
that the symbol for the function is displayed
on the control panel even if the accessory is
not installed!
3
2
5
A
8
1
6
4
7
10
5
9