Truma Boiler Elektro BE14 Operating Instructions Manual

Truma Boiler Elektro BE14 Operating Instructions Manual

Truma boiler elektro be14
Hide thumbs Also See for Boiler Elektro BE14:

Advertisement

Quick Links

Boiler Elektro
Operating instructions
Page 2
To be kept in the vehicle!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Boiler Elektro BE14 and is the answer not in the manual?

Questions and answers

Summary of Contents for Truma Boiler Elektro BE14

  • Page 1 Boiler Elektro Operating instructions Page 2 To be kept in the vehicle!
  • Page 2: Table Of Contents

    (230 V, 850 W). pressures higher than 2.8 bar from occurring. In Germany, the Truma Service Centre must always be notified in the event of faults; in other countries the respective service partners...
  • Page 3: Filling The Boiler

    (e.g. the wardrobe door)! Missing order to prevent limescale deposits and to ensure that it is not blocked. stickers can be requested from Truma. Always observe the operating instructions and the “Important operating notes” prior to starting! The vehicle owner is responsible for correct operation of the appliance.
  • Page 4: Start-Up

    2.8 bar from occurring. If these actions do not remedy the problem, please contact Truma Service. Start-up Maintenance Only original Truma parts may be used for maintenance The boiler must not be operated with a time switch.
  • Page 5: Technical Data

    Heating time from approx. 15 °C to approx. 70 °C approx. 70 min. – Consumable parts which are subject to wear and tear Temperature limit – Use of parts other than original Truma components in any 70 °C of the units Overtemperature protection –...
  • Page 6 Should problems occur, please contact the Truma Service Centre or one of our authorised service partners (see www.truma.com). In order to avoid delays, please have the unit model and serial number ready (see type plate). Truma Gerätetechnik GmbH & Co. KG Service Wernher-von-Braun-Straße 12...

Table of Contents