2-1 Checking the Included Items
The following items are included with the machine. Make sure they are all present and accounted for.
Power cord
Character cutter
(diameter 3.175 mm,
with cutter holder)
Collet
(diameter 3.175 mm)
Adhesive sheet
Roland Software Package
CD-ROM
*1: This is for diameter-4.36 mm character or flat cutters. It cannot be used with diamond scrapers or end mills.
*2: Never use a diameter-4.36 mm cutter at a spindle speed of 15,000 rpm or higher. There is danger of damage to the
spindle unit due to vibration.
26
Chapter 2 Installation and Setup
Depth regulator nose
(nose unit)
Flat cutter
(diameter 3.175 mm,
with cutter holder)
Collet
(diameter 4.36 mm)*1,*2
Vacuum-adapter set
Roland Engrave Studio
CD-ROM
Retaining
Spring
screw
Noes-unit retainer
Spare tool retaining screw
Hexagonal screwdriver
User's Manual
Wrench
Hexagonal wrench
Handy panel
Software guide
(Roland Software Package)
(Roland Engrave Studio)