1 Getting Ready
What You Can Do with the EGX-20
• You can engrave a plate with text or shapes to create a nameplate or the like.
Using Dr. Engrave, the included 2D engraving program, you can easily engrave anything from simple text to complex
designs to produce high-quality engraved plates.
p. 16, "Creating a Nameplate"
• You can cut thick materials up to a depth of 7 mm to create reliefs and other forms.
Using 3D Engrave, the included 3D engraving program, you can easily produces reliefs and other three-dimensional
engraved forms.
p. 28, "Creating a Relief"
Check the Included Items
AC adapter: 1
Nose cones
(large: 1, medium: 1, small: 1)
The medium one is installed on the
machine.
Hexagonal screw driver
Roland Software Package
CD-ROM: 1
6
1 Getting Ready
Power cord: 1
Adhesive sheet
Hexagonal wrenches
: 1
(large: 1 and small: 1)
(with cutter holder)
Test-use plate material: 1
: 1
User's Manual: 1
Cutter: 1