Setting The Xy Origin Point; Setting The Xy Origin Point (Home Position) - Roland EGX-350 User Manual

4-8 Setting the XY Origin Point

Setting the XY Origin Point (Home Position)

This sets the X- and Y-axis coordinates used as the origin point for cutting. This location is termed the XY origin point, which
on this machine is called the "home position. " On this machine, you can set the XY origin anywhere within the operating
range. Set it to match the engraving data and the position of the mounted workpiece.
 P. 45, "Moving to a Specific Position Automatically,"
Procedure

Install a cutter and mount a workpiece.
 P. 54, "Mounting a Workpiece," and p. 56 through 74, "Cutter Installation Method 1" through "Cutter Installation Method 4"

Origin



Press .
Press to confirm.
The XY origin point (the home position) is set.
Press .
The main display appears. The coordinate values for X and Y are set to 0.
Move the cutter to the location you
want to make the XY origin point (the
home position).
 P. 44, "Manual Movement"
Chapter 4 Engraving
75