Part Names And Functions; Front And Interior - Roland EGX-350 User Manual

1-2 Part Names and Functions

Front and Interior

Spindle head *
Handy panel
This is used to perform cutter movement and other
machine operations, and to make various settings.
 P. 42, "Using the Handy Panel. "
* In this manual, the mechanisms around the spindle unit, including the spindle motor, are called the "spindle head. "
Also, the rotary-axis area inside the spindle unit is called the "spindle. "
Lock lever
This locks or unlocks the spindle head.
 P. 82, "The Position of the Lock Lever"
Spindle unit
Front cover
To ensure safety, opening this during
engraving or spindle rotation causes
an emergency stop to occur.
 P. 39, "Emergency Stop Due to Opening or
Closing the Front Cover"
Emergency Stop button
Pressing this stops operation
of the machine.
 P. 38, "Types of Emergency Stops
to Ensure Safety"
Workpiece table
The workpiece to be engraved
is mounted on this.
Chapter 1 Getting Started
23