3A. Attach L-Brackets (To Mounting Structure); 3B. Attach L-Brackets (To Mounting Structure With Safety Clips) - BIG ASS FANS Essence Installation Manual

3a. Attach L-brackets (to mounting structure)

Fasten the L-brackets to the mounting structure using the customer-supplied 1/2-13 or M12 L-Bracket Hardware as shown below. Note:
L-bracket orientation may differ from the illustration.
Proceed to "Hanging the Fan" on the following page.
L-Bracket Hardware (Customer-Supplied):
a. (2) 1/2-13 or M12 GR 8 Bolt
b. (4) 1/2" or M12 Flat Washer
c. (2) 1/2-13 or M12 Nylock Nut
c

3b. Attach L-brackets (to mounting structure with safety clips)

Fasten the L-brackets to the mounting structure using the customer-supplied 1/2-13 or M12 L-Bracket Hardware and the BAF-supplied
safety clips as shown below. Note: Safety clips are used only if the top of the mounting structure is inaccessible due to a ceiling. A
ceiling is not shown in the illustration below. L-bracket orientation may differ from the illustration.
Proceed to "Hanging the Fan" on the following page.
L-Bracket Hardware (Customer-Supplied):
a. (2) 1/2-13 or M12 GR 8 Bolt
b. (4) 1/2" or M12 Flat Washer
c. (2) 1/2-13 or M12 Nylock Nut
b
Mounting Structure: Solid Beam (cont.)
b
a
Safety Clip
& Carabiner
WWW.BIGASSFANS.COM
ESSENCE
®
Not to exceed 5.5"
©2013 DELTA T CORP. ALL RIGHTS RESERVED
b
a
b
c
15