8C. Secure Safety Cable (To Solid Beam); 8D. Secure Safety Cable (To Solid Beam With Safety Clips); Connect Power And Wall Controller Wiring - BIG ASS FANS Essence Installation Manual

22

8c. Secure safety cable (to solid beam)

WARNING: The safety cable is a crucial part of the fan and must be installed
correctly. If you have any questions, call Customer Service.
Secure the safety cable to the mounting structure by wrapping it around the structure
and securing the loose end with the Gripple
tightly around the structure, leaving as little slack as possible.
Note: Exact installation may differ from the illustration.

8d. Secure safety cable (to solid beam with safety clips)

WARNING: The safety cable is a crucial part of the fan and must be installed
correctly. If you have any questions, call Customer Service.
Safety clips are used only when the top of the mounting structure is inaccessible due
to a ceiling.
Route the safety cable through the (2) carabiners on the safety clips, leaving as little
slack as possible. Secure the loose end with the Gripple as shown.
Note: Exact installation may differ from the illustration.

9. Connect power and wall controller wiring

Plug the male wiring harnesses on the fan wiring into the female
wiring harnesses on the power supply cable and controller input
cable as shown. Carefully tuck the wiring into the extension tube.
Hanging the Fan (cont.)
as shown. The cable must be drawn
®
Wall Controller Wiring from Fan
(8 wires)
Cover Plate Assembly Wiring from Fan
(4 wires, to be connected later)
WWW.BIGASSFANS.COM ©2013 DELTA T CORP.
ESSENCE
®
Controller
Input
Cable
ALL RIGHTS RESERVED
Ceiling
Safety Clip
& Carabiner
Power Supply
Cable
Power Wiring
from Fan
(3 wires)