Advertisement
Table of Contents
- 1 Troubleshooting
- 2 Important Safety Instructions
- 3 Technical Specifications
- 4 Parts and Hardware
- 5 Tools Needed
- 6 Preparing the Mounting Location
- 7 Replacing the Remote Control Battery
- 8 Timer Mode
- 9 Operating the Light
- 10 Reversing the Direction of Rotation
- 11 General Troubleshooting
- 12 Annual Maintenance
- Download this manual
Advertisement
Table of Contents
Troubleshooting
Related Manuals for BIG ASS FANS K3150-A2-XX-XX-03-C
Summary of Contents for BIG ASS FANS K3150-A2-XX-XX-03-C
- Page 1 Installation Guide...
- Page 2 Installation Guide: Oct. 2014 Rev. C Model Number: K3150-A2-XX-XX-03-C K3127-A2-XX-XX-03-C S3150-A2-XX-XX-03-C S3127-A2-XX-XX-03-C K3150-A2-XX-XX-02-C K3127-A2-XX-XX-02-C S3150-A2-XX-XX-02-C S3127-A2-XX-XX-02-C Thank you for buying the world’s most innovative fan. Please take a few moments to register your fan with us online at www.haikufan.com/warrantyregistration. This product is sold by a plant whose This device complies with Part 15 of Conforms to UL STD 507–Electric Fans...
-
Page 3: Troubleshooting
Installing the mount brace Hanging the fan Securing the safety cable ELECTRICAL Wiring the fan Installing the wiring cover Wire color chart Wiring diagram (without EMI filter) Wire color chart Wiring diagram (with EMI filter) HAIKU ® by Big Ass Fans... -
Page 4: Important Safety Instructions
IMP O RTA N T S AF E TY I NST RU CT IO N S Read and save these instructions prior to installing and operating your Haiku. Retain this installation guide for maintenance and troubleshooting information. If you have further questions, contact Haiku Customer Service at www.haikufan.com/service. -
Page 5: Technical Specifications
STYLE. Backed by the engineering resources of Big Ass Fans, the fan of choice for smaller spaces that need extraordinary air movement is crystal clear—it’s Haiku. -
Page 6: Parts And Hardware
INTRODUCTION (CONT.) Parts and hardware If you are missing any parts or hardware required for the installation or operation of your Haiku, contact Haiku Technical Service. Note: Drawings below are not to scale. Rubber bushing Mounting hardware Airfoil hardware • (2) M6 x 1 x 25 mm Socket •... - Page 7 • Make sure the space between the fan and ceiling is clear of any obstructions. • Install the fan where there is an outlet box or ceiling joist that is suitable for fan support. HAIKU ® by Big Ass Fans...
-
Page 8: Tools Needed
PREPARATION (CONT.) Tools needed You will need the following tools to install the fan. If you are installing an outlet box, additional tools may be necessary. Consult the outlet box manufacturer’s instructions. • Ladder • Wire stripper • #1 Phillips screwdriver •... - Page 9 Be careful not to damage the circuit board while installing airfoils! Haiku Bamboo ® Haiku ® tip! To ease airfoil installation, the (3) motor top screws can be loosened. Do not forget to retighten them! Motor top screw HAIKU ® by Big Ass Fans...
- Page 10 MOUNTING (CONT.) Step 2a. Installing the lower cover (fans without SenseME™) If you purchased the wall control kit or LED light kit, proceed to the instructions included with the kit. If installing both kits, install the wall control kit first. Return to these instructions once the kits are installed.
- Page 11 Align the four slots on the lower cover trim with the four small round tabs on the bottom of the fan hub, and turn the trim clockwise to lock it into place. Lower Cover Trim Note: If installing the LED light kit, do not install the lower cover trim. HAIKU ® by Big Ass Fans...
- Page 12 MOUNTING (CONT.) The ceiling-mounted outlet box must be suitable for fan support. Step 3. Installing the wiring cover and trim With the fan in the upright position, remove the protective covering from the extension tube. Wiring Slide the wiring cover and wiring cover trim over the cover Wiring extension tube, resting them on the fan hub.
- Page 13 If you have concerns about installing the safety cable, consult a structural engineer. Proceed to Step 8. Wiring the fan on the following page. M8 Bolt Safety M8 Nut cable Split pin Safety cable shackle Lock washer Flat washer Extension Tube HAIKU ® by Big Ass Fans...
- Page 14 E l ec t r ic al CAUTION: Disconnect power to the fan location before wiring the fan! Step 8. Wiring the fan With the fan hanging from the safety cable, connect the fan wires to the EMI filter (if used) and the ceiling wires by twisting the ends together and securing them with wire nuts.
- Page 15 Brown, Black, or Grey Blue Green with Yellow Tracer 220–240 V System AC Hot / L1 Switched 100–240 VAC, AC Neutral / L2 1 Φ, 50–60 Hz, 0.36 A PE / Earth Ground BROWN BLUE GRN W/ YEL HAIKU ® by Big Ass Fans...
- Page 16 ELECTRICAL (CONT.) Wiring diagram (with EMI filter) Ensure power is disconnected before installing the fan! If the EMI filter is included with your fan (country dependent), install it with your fan. Do not use the fan with a dimmer switch. WARNING: Do not connect the fan to a damaged power source! Do not attempt to resolve electrical failures on your own.
-
Page 17: Replacing The Remote Control Battery
To activate Whoosh mode, set the desired maximum fan speed, and then press the Whoosh button. The top Speed indicator will flash to indicate that Whoosh mode is active. To exit Whoosh mode, press the Whoosh, Speed, or On/Off button once. HAIKU ® by Big Ass Fans... -
Page 18: Operating The Light
OPERATION (CONT.) Operating the light The Haiku light accessory operates independently from the fan. Brightness is increased or decreased by pressing the Up or Down Light button on the remote. To turn the light on or off, press the Light On/Off button on the remote. The Up Light button increases brightness;... -
Page 19: General Troubleshooting
• Make sure the fan is rotating counterclockwise when viewed from the floor. • This is normal and may happen occasionally upon startup. An initial slight jerking forward and backward The fan jerks upon startup. does not affect fan operation. HAIKU ® by Big Ass Fans... -
Page 20: Annual Maintenance
M ai nt en an c e WARNING: Disconnect the fan from power before servicing! Annual maintenance Please take a few moments each year to perform the following preventative maintenance procedures on your fan to ensure its safe and efficient operation. If you have any questions, require assistance with your fan, or need replacement parts, contact Haiku Customer Service at www.haikufan.com/service. - Page 24 *004442-01* www.haikufan.com © 2013 Delta T Corporation 004442-01...