Table of Contents
Advertisement
DMD1050 Satellite Modem Board
3.7.1.8 Setting Up The DMD1050 Ethernet Bridge To Operate Like A FIFO
In certain circumstances, it may be desirable to have the Ethernet interface operate in a FIFO like
manner with no reordering of packets. This can be established by using a single port on the
Ethernet interface and setting the Ethernet QOS Type to Port Based and the Ethernet QOS Queue
to Strict Priority. When Setup and used in this manner, the packets will be transmitted in the exact
order in which they are received.
MN-DMD1050
Revision 9
Figure 3-5. Point-to-Multipoint with Daisy Chaining
Theory of Operation
3–12
Advertisement
Table of Contents
