Table of Contents
Advertisement
DMD1050 Satellite Modem Board
Monitor / Eth Link Status Menu
Total Packets:
Error Packets:
PKT Error Rate:
Reset Ethernet Packet Stats:
The status of the following ports may be one of the following:
Down: The link is down.
Unresolved:
10 Mbps Half:
10 Mbps Full:
IMPORTANT
100 Mbps Half: Connected at 100 Base-T Half Duplex.
100 Mbps Full:
Unused:
PORT 1 STATUS
MN-DMD1050
Revision 9
Figure 7-20. Monitor / ETH Link Status Menu
Displays the total number of Ethernet packets received from the
satellite (Only visible when Ethernet is selected as the interface
type).
Displays the number of erred Ethernet packets received from the
satellite (Only visible when Ethernet is selected as the interface
type).
Displays the satellite Packet Error Rate (Only visible when
Ethernet is selected as the interface type).
Allows the user to reset the Ethernet packet statistics by pressing
this button (Only visible when Ethernet is selected as the
interface type).
Unable to agree on connection speed.
Connected at 10 Base-T Half Duplex.
Connected at 10 Base-T Full Duplex.
Connected at 100 Base-T Full Duplex.
The port is not available.
{See the note above}
Displays the current status of LAN Port 1.
Web Browser
7–35
Advertisement
Table of Contents
