Dmd1050 Configurations; Features/Options Installed At Time Of Order; Feature Upgrades; Function Accessibility - Comtech EF Data Radyne DMD1050 Installation And Operation Manual

DMD1050 Satellite Modem Board
The DMD1050's impressive remote accessibility rivals all others in the field. Remote control via
RLLP (Radyne Link Level Protocol), Ethernet 10 Base-T SNMP and Web Browser includes
control of all the modem's features plus software maintenance. The unit presents monitor and
control functions on the screen.
Additional options and configuration (such as Monitor and Control (M&C) Functions) can be
activated in seconds via the Web Browser.
Compatibility with current modems, such as the DMD2050, DMD50, DMD20 and the DISA
certified MIL-188-165 compliant DMD15L are maintained for seamless substitution and addition
to existing systems.
This unit offers built in Standard Interfaces that are selectable from MIL-188-114A and a Dual
Port Ethernet Bridge.
1.2

DMD1050 Configurations

The DMD1050 can be configured in the following different ways:
•
Features and options that are installed when the unit is ordered
•

Feature upgrades

•
Hardware options that the user can install at their own location
•
Options that are installed to a unit that is sent to a comtech service center

1.2.1 Features/Options Installed at Time of Order

Features installed at the time of ordering are the options pre-installed/initialized in the factory
prior to shipment. These can be reviewed from the web browser. Refer to Section 4, User
Interfaces for information on how to view these features.
Factory installed options are chassis and board configurations that are introduced during
manufacture.
1.2.2 Feature Upgrades
Feature Upgrades are a simple and quick way of changing the feature set of an installed modem.
Feature upgrades are how most DMD1050 options are implemented. Features may be purchased
at any time by contacting a salesperson. Refer to Section 3 and Appendix D, for information on
how upgrade features.
1.3

Function Accessibility

All functions can be accessed with a terminal or personal computer via a serial link for complete
remote monitoring and control capability.
MN-DMD1050
Revision 9
Introduction
1–2