DMD1050 Satellite Modem Board
F.2
Point-to-Point Applications
Figure F-1 illustrates a typical application connecting a remote office to the corporate
headquarters via satellite. Because the EEI places no restrictions on the IP addresses or subnet
masks chosen for a particular implementation, there is no lengthy setup required and no need to
change any existing network configurations. Simply connect the WAN port of each router to the
Modem and your satellite network is up and running.
Internet
Firewall
Corporate
LAN
MN-DMD1050
Revision 9
HQ
DMD20
Router
Figure F-1. Point-to-Point Applications
Ethernet Data Interface
Remote
DMD20
Router
Remote
LAN
F–2