Table of Contents
Advertisement
DMD1050 Satellite Modem Board
+3.3V Supply
+5V Supply
+12V Supply
+24V Supply
RESET LATCHED ALARMS
Alarms / Backwards Menu
IBS and IDR Backward Alarms are only available via User Interface i.e.
Web Browser, SNMP, Terminal Screens and RLLP. There are no physical
contacts available for the backward alarms.
IMPORTANT
IDR ALARMS
IDR Backwards #1
SAT Alarm:
MN-DMD1050
Revision 9
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +3.3 Volt power bus
located inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +5 Volt power bus located
inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +12 Volt power bus located
inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +24 Volt power bus located
inside the modem.
Clicking on this button will reset (Clear) all Latched
Alarms
Figure 7-25. Alarms / Backwards Menu
{Pass/Fail, Unmasked/Masked}
Web Browser
7–42
Advertisement
Table of Contents
