DMD1050 Satellite Modem Board
F.7
Remote Monitor and Control via SNMP
Simple Network Management Protocol (SNMP) is the most widely used protocol for network
management available today. It provides a secure, open network standard whereby a PC with a
MIB Browser can be used to monitor and control almost any Cisco router, gateway, or Radyne
modem. And because the Enhanced Ethernet Interface offers a multi-port Ethernet interface and
daisy chain capability, every modem, even those in complex point to multi-point systems, can be
easily controlled from one central location. All without requiring extensive network setup or
additional equipment at every remote site.
Figure F-6 illustrates complete Monitor and Control of all Radyne equipment from a centrally
located PC at the Hub.
Hub
Router
LAN
MN-DMD1050
Revision 9
DMD 50
M&C
Daisy Chain
DMD 20
Switch
M&C
Daisy Chain
DMD20
M&C
Figure F-6 – Remote Monitor and Control
Ethernet Data Interface
Router
DMD50
M&C
Router
DMD50
M&C
Router
DMD50
M&C
Remote
LAN
Remote
LAN
Remote
LAN
F–7