Table of Contents
Advertisement
DMD1050 Satellite Modem Board
Rx Buffer Level (Fill %):
RX Buffer Reset (ENTER)
Rx Bit Errors:
+1.5V TX Supply
+1.5V RX Supply
+3.3V Supply
+5V Supply
+12V Supply
+20V Supply
MN-DMD1050
Revision 9
{0 – 100%}
Displays the status of the Doppler Buffer. This window is above
the Gel Tab area.
Allows the user to re-center the Doppler Buffer when <ENTER>
is pressed on the web browser screen.
Displays the current error count from the Viterbi Decoder.
Displays the measured voltage of the 1.5 Volt Tx power bus
located inside the modem.
Displays the measured voltage of the 1.5 Volt Rx power bus
located inside the modem.
Displays the measured voltage of the +3.3 Volt power bus
located inside the modem.
Displays the measured voltage of the +5 Volt power bus located
inside the modem.
Displays the measured voltage of the +12 Volt power bus located
inside the modem.
Displays the measured voltage of the +20 Volt power bus located
inside the modem.
Web Browser
7–34
Advertisement
Table of Contents
