Solving Print Quality Problems - Xerox DocuPrint N3225 User Manual

Solving Print Quality Problems

Solving Print Quality Problems
Table 5.3 Print quality problems
Problem
Light/faint prints
Overall image is lighter
than normal.
5-30 User Guide
Table 5.3 lists common print quality problems, the
possible cause, and recommended actions.
The cases listed in Table 5.3 are probable causes only, and
may not represent all of the possible cases that may occur
under actual operating conditions. If you experience a problem
that does not seem to fall under any of the cases listed in this
table, or if you are concerned about any other aspect of printer
operation, contact your dealer.
Possible Cause(s)
Draft Mode.
Toner level low/empty.
Damp paper stock.
Corrective Action(s)
Turn off Draft Mode.
Remove the Laser Print Cartridge carefully
and vigorously shake it several times, then
re-install it. (This may help redistribute the
remaining toner before having to replace
the cartridge.) Refer to "Replacing the Laser
Print Cartridge" (page 4-3).
Replace paper stock.
Table 5.3 Page 1 of 8