Operational Safety - Xerox DocuPrint N3225 User Manual

Operational Safety

Your printer and supplies were designed and tested to
meet strict safety requirements. These include safety
agency examination, approval, and compliance with
established environmental standards.
Your attention to the following safety guidelines will help
to ensure the continued safe operation of your printer.
• Use the materials and supplies specifically designed for
your printer. The use of unsuitable materials may result
in poor performance and possibly a hazardous
situation.
• Follow all warnings and instructions marked on, or
supplied with, the printer.
• Place the printer in a dust free area where the
temperature range is 41 to 95
relative humidity is 15 to 85%.
• Choose a location for the printer with sufficient space
around it for operation and maintenance.
• Place the printer in an area where there is adequate
space for ventilation and servicing. The recommended
spacing is 10 in. (25cm) behind the printer, 10 in.
(25 cm) on either side of the printer, 24 in. (61 cm) in
front of the printer and 30 in. (75 cm) above the
printer.
• Do not subject your printer to severe changes in
temperature and/or humidity.
Operational Safety
o o
F (5 to 35 C) and the
5