Xerox DocuPrint N3225 User Manual page 80

Using the Control Panel
Table 3.6 Menu Options (continued)
Menu
Ethernet Menu NetBEUI PDL
(continued)
NetBEUI Bin PS
AppSocket Enabl
AppSocket PDL
AppSocket Bin PS
ETalk Enable
HTTP Enable
IP Address Res
IP Address
Sub Net Mask
Default Gateway
Port Timeout
Speed
3-22 User Guide
Description and Items
Sets the default emulation for the Ethernet NetBEUI interface.
Enables or disables the NetBEUI binary mode of PostScript.
Enables or disables the Ethernet AppSocket interface.
Sets the default Print Description Language emulation for the
Ethernet AppSocket interface.
Enables or disables the AppSocket binary mode of PostScript.
Enables or disables the Ethernet EtherTalk protocol.
Enables or disables the Ethernet HTTP Server protocol.
Sets the method used to resolve (assign) the IP address,
including Sub Net mask and default gateway.
Sets the four byte IP address. This item appears only if the IP
Address Res is set to static.
Sets the four byte Sub Net Mask address. This item appears
only if the IP Address Res is set to static.
Sets the four byte Default Gateway address.
Sets the time for determining when to end an incomplete
print job and poll the next port in the polling sequence.
Sets the speed of the 10/100 Ethernet interface and whether
half or full duplex Ethernet. 10 MB is the default.
Table 3.6 Page 8 of 13