Xerox DocuPrint N3225 User Manual page 122

Paper Jams
Table 5.1 Paper Jam Messages (continued)
Message
Clear Area A,B
Reset Tray 3
Clear Area A,B,C
Reset Tray 4
Clear Area A,B,C
Reset Tray 5
Clear Area H
Close Cover H
5-8 User Guide
Description/Corrective Action
A paper jam has occurred in Areas A and B. Use one of the following
procedures to clear Area A:
• "Clearing Area A (Without Duplex Module)" (page 5-14), or
• "Clearing Area A (With Duplex Module)" (page 5-16).
Then clear Area B (page 5-18) and reset Tray 3.
A paper jam has occurred in Areas A, B, and C. Use one of the following
procedures to clear Area A:
• "Clearing Area A (Without Duplex Module)" (page 5-14), or
• "Clearing Area A (With Duplex Module)" (page 5-16).
Then clear Areas B and C (page 5-18).
A paper jam has occurred in Areas A, B, and C. First, use one of the following
procedures to clear Area A:
• "Clearing Area A (Without Duplex Module)" (page 5-14), or
• "Clearing Area A (With Duplex Module)" (page 5-16).
Then clear Areas B and C (page 5-18).
The finisher compiler tray (Area H) safety switch is on. Remove the obstacle
from Area H.
Finisher cover H is not closed entirely, or the Compiler cover safety switch is
open or the cover switch is open. Remove the obstacle from this area and
close the door.
Table 5.1 Page 2 of 7